Pass Exam With Full Sureness - 300-430 Dumps with 218 Questions
Verified 300-430 dumps Q&As - 100% Pass from ActualTestsIT
NEW QUESTION # 27
Refer to the exhibit.
An engineer deployed a Cisco WLC using local EAP. Users who are configured for EAP-PEAP cannot connect to the network. Based on the local EAP debug controller provided, why is the client unable to connect?
- A. The user is using invalid credentials.
- B. The Cisco WLC is configured for the incorrect date.
- C. The client is falling to accept certificate.
Answer: C
NEW QUESTION # 28
After installing and configuring Cisco CMX, an administrator must change the NTP server on the Cisco CMX server. Which action accomplishes this task?
- A. Manually edit /etc/ntp.conf using an XML editor before restarting the server by using service restart all services.
- B. Log in to the Cisco CMX GUI as the administrator and type the IP address of the NTP server in System tab > Settings> TimeZone/NTP.
- C. Log in to the Cisco CMX CLI and issue set ntp server NTP_IP where NTPJP is the IP of the NTP server.
- D. Manually edit /etc/ntp.conf as the admin user before restarting ntpd by using service ntpd restart.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/connected-mobile-experiences/200906-Troubleshootin
NEW QUESTION # 29
An engineer wants to upgrade the APs in a Cisco FlexConnect group. To accomplish this upgrade, the FlexConnect AP Upgrade setting will be used. One AP of each model with the lowest MAC address in the group must receive the upgrade directly from the controller. Which action accomplishes this direct upgrade?
- A. Reboot all APs before the upgrade.
- B. Do not set any master APs.
- C. Allocate the master APs to different groups.
- D. Remove the APs from the group.
Answer: C
NEW QUESTION # 30
An engineer is implementing RADIUS to restrict administrative control to the network with the WLC management IP address of 192.168.1.10 and an AP subnet of 192.168.2.0/24. Which entry does the engineer define in the RADIUS server?
- A. NAS entry of the virtual interface and the network range 192 168 2 0/255 255 255 0
- B. administrative access defined on the WLC and the network range 192 168 2 0/255 255 254.0
- C. shared secret defined on the WLC and the network range 192 168 1 0/255 255 254.0
- D. WLC roles for commands and the network range 192 168 1 0/255 255 255.0
Answer: A
NEW QUESTION # 31
Refer to the exhibit.
An engineer is troubleshooting a client connectivity issue. The client is in the RUN state, and no traffic is passed after authenticating by using Cisco ISE. Which action resolves the problem?
- A. Enable rate-limiting to the client.
- B. Configure a different client VLAN after authentication.
- C. Apply a lower WMM QoS.
- D. Disable the ACL that prevents traffic from being allowed.
Answer: B
NEW QUESTION # 32
Refer to the exhibit.
An engineer deployed a Cisco WLC using local EAP. Users who are configured for EAP-PEAP cannot connect to the network. Based on the local EAP debug controller provided, why is the client unable to connect?
- A. The Cisco WLC is configured for the incorrect date.
- B. The user is using invalid credentials.
- C. The client is falling to accept certificate.
- D. The Cisco WLC local EAP profile is misconfigured
Answer: B
NEW QUESTION # 33
The IT manager is asking the wireless team to get a report for all guest user associations during the past two weeks. In which two formats can Cisco Prime save this report? (Choose two.)
- A. PDF
- B. CSV
- C. DOC
- D. XLS
- E. plain text
Answer: A,B
Explanation:
NEW QUESTION # 34
A wireless engineer needs to implement client tracking. Which method does the angle of arrival use to determine the location of a wireless device?
- A. angle of incidence
- B. triangulation
- C. time distance of arrival
- D. received signal strength
Answer: A
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/WiFiLBS-DG/wifich2.html
NEW QUESTION # 35
An engineer must run a Client Traffic Stream Metrics report in Cisco Prime Infrastructure. Which task must be run before the report?
- A. client status
- B. software
- C. radio performance
- D. scheduled report
Answer: C
NEW QUESTION # 36
An engineer configures the wireless LAN controller to perform 802.1x user authentication. Which configuration must be enabled to ensure that client devices can connect to the wireless, even when WLC cannot communicate with the RADIUS?
- A. Cisco Centralized Key Management
- B. authentication caching
- C. pre-authentication
- D. local EAP
Answer: D
Explanation:
NEW QUESTION # 37
A network engineer needs to configure multicast in the network. The implementation will use multiple multicast groups and PIM routers. Which address provides automatic discovery of the best RP for each multicast group?
- A. 224.0.0.14
- B. 224.0.1.39
- C. 224.0.0.13
- D. 224.0.1.40
Answer: D
Explanation:
NEW QUESTION # 38
An engineer has implemented 802.1x authentication on the wireless network utilizing the internal database of a RADIUS server. Some clients reported that they are unable to connect. After troubleshooting, it is found that PEAP authentication is failing. A debug showed the server is sending an Access-Reject message. Which action must be taken to resolve authentication?
- A. Replace the client certificates from the CA with the server certificate.
- B. Disable the server certificate to be validated on the client.
- C. Use the user password that is configured on the server.
- D. Update the client certificate to match the user account.
Answer: B
Explanation:
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_troubleshooting.html
NEW QUESTION # 39
Which AP model of the Cisco Aironet Active Sensor is used with Cisco DNA Center?
- A. 1800s
- B. 3600e
- C. 4800i
- D. 3800s
Answer: A
NEW QUESTION # 40
An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)
- A. Static WEP
- B. Static WEP + 802.1X
- C. 802.1X
- D. CKIP
- E. WPA+WPA2
Answer: A,E
Explanation:
"When setting the security setting in the WLAN, there are specific elements that are not supported on the 600 series. For Layer 2 Security, only these options are supported for the Cisco Aironet 600 Series OEAP: None WPA+WPA2 Static WEP can also be used but not for .11n data rates." https://www.cisco.com/c/en/us/support/docs/wireless/aironet-600-series-officeextend-access-point/113003-office-extend-config-00.html#wlan-settings
NEW QUESTION # 41
Which two restrictions are in place with regards to configuring mDNS? (Choose two.)
- A. mDNS is not supported on FlexConnect APs with a locally switched WLAN.
- B. mDNS cannot use UDP port 5353 as the destination port.
- C. mDNS uses only UDP port 5436 as a destination port.
- D. Controller software must be newer than 7.0.6+.
- E. mDNS is not supported over IPv6.
Answer: A,E
Explanation:
NEW QUESTION # 42
Which devices can be tracked with the Cisco Context Aware Services?
- A. wired devices
- B. wired and wireless devices
- C. Cisco certified wireless devices
- D. wireless devices
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/context-aware-software/110836-cas-faq.html
NEW QUESTION # 43
An engineer is following the proper upgrade path to upgrade a Cisco AireOS WLC from version 7.3 to 8.9.
Which two ACLs for Cisco CWA must be configured when upgrading from the specified codes? (Choose two.)
- A. Permit any any any
- B. Permit 0.0.0.0 0.0.0.0 any DNS any
- C. Permit 0.0.0.0 0.0.0.0 UDP DNS any
- D. Permit 0.0.0.0 0.0.0.0 UDP any any
- E. Permit 0.0.0.0 0.0.0.0 UDP any DNS
Answer: C,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732-central-web-auth-00.html
NEW QUESTION # 44
......
300-430 Dumps Full Questions - Exam Study Guide: https://protechtraining.actualtestsit.com/Cisco/300-430-exam-prep-dumps.html