[Q78-Q102] Download Cisco 350-501 Sample Questions [Mar-2023]

Share

Download Cisco 350-501 Sample Questions [Mar-2023]

Real 350-501 Exam Questions and Answers FREE


Networking: 20%

  • Implementing Border Gateway Protocol (v6 and v4 for EBGP & IBGP);
  • Implementing the routing policy language and route maps of Border Gateway Protocol (BGP), Intermediate System to Intermediate System protocol (IS-IS), and Open Shortest Path First protocol (OSPF);
  • Implementing the Open Shortest Path First protocol (v3 & v2);
  • Describing IPv6 transition (NAT64, NAT44, 6RD, DS Lite, and MAP);
  • Describing the Border Gateway Protocol path selection algorithm;

For more info read reference:

Exam Guide Exam Contents

 

NEW QUESTION 78
BGP has been implemented on an IOS XR router. Which configuration sends BGP IPv4 labels to build inter- domain LSPs?

  • A.
  • B.
  • C.
  • D.

Answer: B

Explanation:
Section: Services

 

NEW QUESTION 79
What are two characteristics of MPLS TE tunnels? (Choose two.)

  • A. The headend and tailend routers of the tunnel must have a BGP relationship.
  • B. They use RSVP to provide bandwidth for the tunnel.
  • C. They require EIGRP to be running in the core.
  • D. They are unidirectional.
  • E. They are run over Ethernet cores only.

Answer: B,D

 

NEW QUESTION 80
Refer to the exhibit.

Which two topology changes happen to the IS-IS routers? (Choose two.)

  • A. All four routers are operating as Level 1 routers only.
  • B. All four routers are operating as Level 2 routers only.
  • C. R1 and R4 are Level 2 neighbours.
  • D. R1 and R2 are Level 2 neighbours.
  • E. All four routers are operating as Level 1-2 routers.

Answer: D,E

 

NEW QUESTION 81
Refer to the exhibit:

Which effect of this configuration is true?

  • A. R1 can failover only to a peer that is configured for LDP SSO/NSF
  • B. R1 can support a graceful restart operation on the peer, even if graceful restart is disabled on the peer
  • C. R1 can failover to any peer
  • D. R1 can support a peer that is configured for LDP SSO/NSF as the peer recovers from an outage

Answer: A

 

NEW QUESTION 82
Refer to the exhibit:

Export statistics received do not include the BGP next hop.
Which statement about the NetFlow export statistics is true?

  • A. To include the BGP next hop in the export statistics, those keywords must be included with the version 9 entry.
  • B. Only the origin AS of the source router will be included in the export statistics.
  • C. Loopback 0 must be participating in BGP for it to be included in the export statistics
  • D. The origin AS and the peer-as will be included in the export statistics

Answer: D

 

NEW QUESTION 83
Drag and Drop Question
Drag and drop the LDP features from the left onto the correct usages on the right.

Answer:

Explanation:

 

NEW QUESTION 84
A network operator needs to implement PIM-SSM multicast configuration on customer's network so that users in different domains are able to access and stream live traffic. Which two actions must the engineer perform on the network to make the streaming work? (Choose two.)

  • A. Enable PIM dense mode on the device.
  • B. Enable PIH sparse mode on the device.
  • C. Enable IGMP version 2 at the interface level.
  • D. Enable IGMP version 3 at the interlace level.
  • E. Configure at least one MSDP peer on the network.

Answer: D,E

 

NEW QUESTION 85
Refer to the exhibit:

P3 and PE4 are at the edge of the service provider core and serve as ABR routers Aggregation areas are on either side of the core.
Which statement about the architecture is true?

  • A. To support seamless MPLS. TDP must be used as the label protocol
  • B. To support seamless MPLS, the BGP route reflector feature must be disabled
  • C. If each area is running its own IGP. the ABR routers must redistribute the IGP routing table into BGP
  • D. If each area is running its own IGP. BGP must provide an end-to-end MPLS LSP

Answer: D

 

NEW QUESTION 86
Drag and drop the multicast concepts from the left onto the correct descriptions on the right.

Answer:

Explanation:

Explanation
1: PIM-DM 2:IGMP 3:PIM-SM 3:shared tree 4:source tree

 

NEW QUESTION 87
Refer to the exhibit.

A network engineer is deploying SNMP configuration on client's routers. Encrypted authentication must be included on router 1 to provide security and protect message confidentially. Which action should the engineer perform on the routers to accomplish this task?

  • A. snmp-server host 192.168.0.254 informs version 3 auth testuser config.
  • B. snmp-server user testuser group 1 remote 192.168.0.254 v3 auth md5 testpassword
  • C. snmp-server group group 1 v3 auth.
  • D. snmp-server community public

Answer: B

 

NEW QUESTION 88
Drag and drop the functionalities from the left onto the target fields on the right.

Answer:

Explanation:

 

NEW QUESTION 89
Which configuration enables BGP FlowSpec client function and installation of policies on all local interfaces?
A)

B)

C)

D)

  • A. Option B
  • B. Option A
  • C. Option C
  • D. Option D

Answer: C

 

NEW QUESTION 90
Which statement about the overlay VPN model is true?

  • A. The overlay model provides the ability to reduce the amount of routing state that core routers need to hold to meet the scalability requirements compared to the MPLS VPN model.
  • B. The overlay model provides privacy and isolation between the different customers by using packet filters that control the data to and from the customer routers.
  • C. The overlay model does not scale to the same size as the MPLS VPN model.
  • D. The overlay model demands a lot from provisioning because when adding one customer site, it demands many configuration changes at many other routers on the provider side.

Answer: A

 

NEW QUESTION 91
An engineer is setting up overlapping VPNs to allow VRF ABC and XYZ to communicate with VRF CENTRAL but wants to make sure that VRF ABC and XYZ cannot communicate. Which configuration accomplishes these objectives?



  • A. Option A
  • B. Option D
  • C. Option C
  • D. Option B

Answer: D

 

NEW QUESTION 92
Refer to the exhibit.

What reestablishes the OSPF neighbor relationship between Router 1 and Router 2?

  • A. OSPF process IDs match
  • B. hello intervals match
  • C. correct wildcard mask is used on Router 2
  • D. authentication is added to the configuration

Answer: B

 

NEW QUESTION 93
Refer to the exhibit. Assume all other configurations are correct and the network is otherwise operating normally.
Which conclusion can you draw about the neighbor relationship between routers R1 and R2?

  • A. The neighbor relationship will be up only if the two devices have activated the correct neighbor relationships under the IPv4 address family
  • B. The neighbor relationship is up
  • C. The neighbor relationship is down because the loco I-as value for R2 is missing in the R1 neighbor statement
  • D. The neighbor relationship is down because R1 believes R2 is in AS 65012.

Answer: D

 

NEW QUESTION 94

Refer to the exhibit. While troubleshooting a connectivity issue on router R2, a network engineer with an employee id: 1234:44:876 notices that although it detects three OSPF links from R1, the OSPF prefixes are missing from the routing table. What is the reason for the problem?

  • A. The subnet masks on the serial interfaces are mismatched
  • B. The R2 Serial1/0 interface is configured with an IP address, but the R1 Serial1/0 interface is unnumbered
  • C. Both loopback interfaces on R1 are configured as stub
  • D. The serial interfaces have different MTUs

Answer: C

Explanation:
Section: Networking
Explanation/Reference:

 

NEW QUESTION 95
Refer to the exhibit.

Router 1 is missing the route for the router 2 loopback 0. What should the engineer change to fix the problem?

  • A. the hello timers on Router 1 and Router 2 to be different
  • B. the area numbers on Router 1 and Router 2 to be similar
  • C. the wildcard mask network statement in OSPF of Router 2
  • D. Router 1 to be an ABR

Answer: B

 

NEW QUESTION 96
Refer to the exhibit.

Router 4 is added to the network and must be in the same area as router 1. Which NET should the engineer assign?

  • A. 49.0011.0000.0000.0002.00
  • B. 49.0001.0000.0000.0004.00
  • C. 49.0111.0000.0000.0001.00
  • D. 49.0011.0000.0000.0003.00

Answer: D

 

NEW QUESTION 97
You are configuring MPLS traffic-engineering tunnels in the core. Which two ways exist for the tunnel path across the core? (Choose two )

  • A. The bandwidth statement creates a "hard" reservation on the link.
  • B. A zero bandwidth tunnel is not a valid option
  • C. Tunnel links inherit IGP metrics by default unless overridden
  • D. The dynamic path option is supported only with IS-IS
  • E. Tunnels can be configured with dynamic path or explicitly defined path

Answer: C,E

 

NEW QUESTION 98
You are writing an RPL script to accept routes only from certain autonomous systems Consider this code.

If you apply this code to BGP filters, which effect does the code have on your router?

  • A. denies routes from AS 7070
  • B. denies routes from AS 7007
  • C. allows routes from AS 770
  • D. allows routes from AS 7077

Answer: D

 

NEW QUESTION 99
After a possible security breach, the network administrator of an ISP must verify the times that several different users logged into the network. Which command must the administrator enter to display the login time of each user that activated a session?

  • A. show netconf-yang sessions detail
  • B. show netconf-yang sessions
  • C. show platform software yang-management process
  • D. show netconf-yang datastores

Answer: A

 

NEW QUESTION 100
Refer to the exhibit:

What does this value mean when it is received in XML?

  • A. It indicates a break in a sequence
  • B. It shows the ending of the script
  • C. It means a data fie4d is blank
  • D. It indicates a value assigned by a network administrator to tag a route

Answer: C

 

NEW QUESTION 101
Drag and drop the functions from the left onto the Path Computation Element Protocol roles on the right.

Answer:

Explanation:

 

NEW QUESTION 102
......


Additionally, the students can find some information from different books. As for Cisco 350-501, it is recommended to read the following:

  • How I Passed Implementing & Operating Cisco Service Provider Network Core Technologies Exam: Successfully Proven Tips by Rocismo Liolentz Publications;
  • CCNP Service Provider (SPCOR 350-501) by Saransh Paliwal.

Moreover, you can take practice tests that are available on the Internet. This tool allows the learners to dive into the atmosphere of a real exam and evaluate their current level of preparedness.

 

Truly Beneficial For Your Cisco Exam: https://protechtraining.actualtestsit.com/Cisco/350-501-exam-prep-dumps.html