Updated 156-536 Dumps Questions Are Available [2026] For Passing CheckPoint Exam
Free UPDATED CheckPoint 156-536 Certification Exam Dumps is Online
CheckPoint 156-536 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 56
How many digits are required in the FDE policy settings to enable a Very High-Security level for remote help on pre-boot?
- A. Minimum 20 digits
- B. 40 digits
- C. 24 digits
- D. Maximum 30 digits
Answer: C
NEW QUESTION # 57
Full Disk Encryption (FDE) protects data at rest stored on a Hard Drive.
- A. NFS Share
- B. Hard Drive
- C. SMB Share
- D. RAM Drive
Answer: B
NEW QUESTION # 58
With which release of Endpoint Client is the Anti-Malware engine based on Sophos instead of Kaspersky?
- A. Endpoint Client release E84.40 and higher for all deployments
- B. Endpoint Client release E81.20 and higher for On-premises deployments
- C. Endpoint Client release E83.20 and higher for Cloud deployments
- D. Endpoint Client release E86.26 and higher for Cloud deployments
Answer: A
NEW QUESTION # 59
In the POLICY Tab of the Harmony Endpoint portal for each software capability (Threat Prevention, Data Protection, etc.), rules can be created to protect endpoint machines. Choose the true statement.
- A. There are no rules to start with, and administrators must create rules in order to deploy the capability policies, actions, and behavior.
- B. There are only rules for the Harmony Endpoint Firewall capability. All other capabilities only include Actions.
- C. The default rule is a global rule which applies to all users and computers in the organization.
- D. The default rule is a global rule that only applies to Computers. Rules for Users must be added manually by the administrator.
Answer: C
Explanation:
In the Harmony Endpoint portal, the POLICY Tab is used to manage security policies for various software capabilities such as Threat Prevention, Data Protection, and others. These policies are enforced through rules that dictate how each capability behaves on endpoint machines. TheCP_R81.
20_Harmony_Endpoint_Server_AdminGuide.pdfprovides clear evidence on how these rules are structured by default.
Onpage 166, under the section "Defining Endpoint Security Policies," the documentation states:
"You create and assign policies to the root node of the organizational tree as a property of each Endpoint Security component." This indicates that a default policy (or rule) is established at the root level of the organizational hierarchy, inherently applying to all entities-users and computers-within the organization unless overridden by more specific rules. Further supporting this, onpage 19, in the "Organization-Centric model" section, it explains:
"You then define software deployment and security policies centrally for all nodes and entities, making the assignments as global or as granular as you need." This global assignment at the root node confirms that the default rule encompasses all users and computers in the organization, aligning withOption D. The documentation does not suggest that the default rule is limited to computers only (Option A), nor does it state that no rules exist initially (Option B), or that rules are exclusive to the Firewall capability (Option C). Instead, each capability has its own default policy that applies globally until customized.
* Option Ais incorrect because the default rule is not limited to computers. Page 19 notes: "The Security Policies for some Endpoint Security components are enforced for each user, and some are enforced on computers," showing that policies can apply to both based on the component, not just computers.
* Option Bis false as the guide confirms default policies exist at the root node, not requiring administrators to create them from scratch (see page 166).
* Option Cis inaccurate since rules exist for all capabilities (e.g., Anti-Malware on page 313, Media Encryption on page 280), not just Firewall, and all capabilities involve rules, not just actions.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 19: "Organization-Centric model" (global policy assignment).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 166: "Defining Endpoint Security Policies" (policy assignment to the root node).
NEW QUESTION # 60
How does Full Disk Encryption (FDE) add another layer of security?
- A. By offering port protection
- B. By offering media encryption
- C. By offering pre-boot protection
- D. By offering encryption
Answer: C
NEW QUESTION # 61
When does the pre-boot logon require users to authenticate?
- A. Before the computer's main operating system starts
- B. Before the credentials are verified
- C. Before they enter their username
- D. Before password verification
Answer: A
Explanation:
Pre-boot logon, part of Check Point Harmony Endpoint's Full Disk Encryption (FDE), requires users to authenticatebefore the computer's main operating system starts. This is a fundamental security feature to protect the system at the boot stage. TheCP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdfonpage 223
, under "Authentication before the Operating System Loads (Pre-boot)," states:
"Pre-boot protection requires users to authenticate before the computer's operating system starts." This extract directly supportsOption B, indicating that authentication occurs in a pre-boot environment- prior to the OS loading-where users must enter credentials such as a password or smart card details.
* Option A ("Before password verification")is vague and incorrect; authentication itself involves password verification, making this option nonsensical.
* Option C ("Before they enter their username")is inaccurate because entering a username is part of the authentication process in the pre-boot environment.
* Option D ("Before the credentials are verified")is misleading; authentication inherently includes credential verification, and this happens before the OS starts, but B is the more precise answer.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 223: "Authentication before the Operating System Loads (Pre-boot)" (confirms authentication occurs before the OS starts).
NEW QUESTION # 62
What are the benefits of the Check Point Consolidated Cyber Security Architecture?
- A. Single policy
- B. Consolidated security functions
- C. Decentralized management
- D. Consolidated network functions
Answer: B
Explanation:
The Check Point Consolidated Cyber Security Architecture is designed to integrate multiple security functions into a unified platform. This architecture provides "consolidated security functions," which is its primary benefit. This means it combines endpoint protection, data security, and threat prevention into a single, manageable system, improving efficiency and simplifying security administration for organizations. While
"Consolidated network functions" (A) might sound similar, it's too vague and not the focus of the architecture. "Single policy" (B) is not highlighted as a standalone benefit, and "Decentralized management" (C) contradicts the centralized approach of this architecture. Thus, "Consolidated security functions" (D) is the correct answer, as it aligns directly with the documented advantages.
NEW QUESTION # 63
Where are the Endpoint Policy Servers located?
- A. Between the Endpoint clients and the NMS
- B. Between the Endpoint clients and the EMS
- C. Between the Endpoint clients and the EPS
- D. Between the Endpoint clients and the SMS
Answer: B
Explanation:
Endpoint Policy Servers (EPS) are integral to the Harmony Endpoint architecture, designed to optimize communication between Endpoint clients and the Endpoint Security Management Server (EMS). TheCP_R81.
20_Harmony_Endpoint_Server_AdminGuide.pdfexplicitly defines their placement.
Onpage 25, under "Optional Endpoint Security Elements," the documentation states:
"Endpoint Policy Servers improve performance in large environments by managing most communication with the Endpoint Security clients. Managing the Endpoint Security client communication decreases the load on the Endpoint Security Management Server, and reduces the bandwidth required between sites." This confirms that EPS are positionedbetween the Endpoint clients and the EMS, handling tasks like policy downloads, heartbeats, and updates to offload the EMS.Option Baccurately reflects this architecture.
Evaluating the other options:
* Option A: "Between the Endpoint clients and the EPS" is nonsensical, as EPS (Endpoint Policy Servers) cannot be between themselves and clients-it's a self-referential error.
* Option C: "Between the Endpoint clients and the NMS" introduces "NMS," likely a typo for Network Management System, which isn't part of Harmony Endpoint's architecture per the document.
* Option D: "Between the Endpoint clients and the SMS" refers to the Security Management Server (SMS), which manages gateways in Check Point's broader ecosystem, not the EMS specific to Harmony Endpoint (seepage 23for EMS definition).
Thus,Option Bis directly supported by the documentation as the correct placement of EPS.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 25: "Optional Endpoint Security Elements" (EPS placement and role).
NEW QUESTION # 64
In the OVERVIEW Tab of the Harmony Endpoint portal which Overview shows the Active Alerts?
- A. The Security Overview
- B. The Policy Overview
- C. The Computer Management view
- D. The Operational Overview
Answer: D
NEW QUESTION # 65
What blades have to be enabled on the Management Server in order for the Endpoint Security Management Server to operate?
- A. You can enable all gateway related blades.
- B. The SmartEndPoint super Node on the Management.
- C. Logging & Status, SmartEvent Server, and SmartEvent Correlation unit must be enabled.
- D. The administrator has to enable compliance and Network Policy Management.
Answer: C
NEW QUESTION # 66
What is the time interval of heartbeat messages between Harmony Endpoint Security clients and Harmony Endpoint Security Management?
- A. 60 minutes
- B. 30 seconds
- C. 60 seconds
- D. 60 milli-seconds
Answer: C
Explanation:
In Harmony Endpoint, heartbeat messages are periodic signals sent from endpoint clients to the Endpoint Security Management Server to report their status and check for updates. The default time interval for these messages is 60 seconds. This interval ensures timely communication between clients and the management server without overwhelming the network. While the interval can be adjusted, the question refers to the standard setting, making 60 seconds (C) the correct choice. 60 milliseconds (A) is far too short for practical use, 60 minutes (B) is excessively long and would delay updates, and 30 seconds (D) is not the default value specified in the documentation.
NEW QUESTION # 67
When you are facing a technical problem and you need help, what resource is recommended for all technical information about Check Point products?
- A. Press F1 in the SmartConsole and write down the problem.
- B. Check Point SecureKnowledge, CheckMates, and Check Point Customer Support.
- C. You can use an online search engine like Google and you will find the answer in the first results.
- D. You can use any infosec-related online sources.
Answer: B
Explanation:
When facing a technical problem with Check Point products, the recommended resources for accurate and comprehensive technical information areCheck Point SecureKnowledge,CheckMates, andCheck Point Customer Support. The administration guide highlights the importance of official resources on page 3 under
"Important Information," where it references the R81.20 home page and encourages feedback to improve documentation, implying a structured support ecosystem. SecureKnowledge is Check Point's technical knowledge base, CheckMates is the official community forum, and Customer Support offers direct assistance.
Options like Google (A) or generic infosec sources (C) may provide unverified or incomplete information, while pressing F1 in SmartConsole (D) is not a documented support method in the guide.
NEW QUESTION # 68
Which command in CLI session is used to check status of Check Point processes on Harmony Endpoint Management server?
- A. cpwd state
- B. show mgmt server state
- C. ps -aux | grep EPM
- D. cpwd_admin list
Answer: D
NEW QUESTION # 69
The CISO office evaluates Check Point Harmony Endpoint and needs to know what kind of post-infection capabilities exist. Which post-infection capabilities does the Harmony Endpoint Suite include?
- A. IPS Attack Analysis (Forensics), Deploy and Destroy, and Isolation
- B. FW Attack Analysis (Forensics), Detect and Prevent, and Isolation
- C. Automated Attack Analysis (Forensics), Remediation and Response, and Quarantine
- D. IPS Attack Analysis (Forensics), Detect and Prevent, and Isolation
Answer: C
Explanation:
Harmony Endpoint offers advanced post-infection capabilities to analyze and mitigate threats after they occur.
These features are detailed in theCP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdfunder its threat prevention sections.
Onpage 346, under "Forensics," the guide states:
"Forensics provides automated attack analysis, helping to understand the nature and impact of threats." Onpage 336, under "Quarantine Settings and Attack Remediation," it notes:
"Quarantine Settings and Attack Remediation allow for isolating infected files and systems." Additionally, onpage 329, under "Harmony Endpoint Anti-Ransomware, Behavioral Guard and Forensics," it mentions:
"Analyzes incidents reported by other components."
These extracts collectively confirm that Harmony Endpoint includes:
* Automated Attack Analysis (Forensics)- Automatically analyzing threats post-infection.
* Remediation and Response- Addressing and repairing the damage (implied in attack remediation).
* Quarantine- Isolating infected elements to prevent further spread.
This matchesOption Bperfectly.
Evaluating the other options:
* Option A: IPS Attack Analysis (Forensics), Deploy and Destroy, and Isolation- "IPS" is a network feature, not endpoint-specific, and "Deploy and Destroy" is not a documented term.
* Option C: FW Attack Analysis (Forensics), Detect and Prevent, and Isolation- "FW" (Firewall) is unrelated to endpoint post-infection, and "Detect and Prevent" are pre-infection actions.
* Option D: IPS Attack Analysis (Forensics), Detect and Prevent, and Isolation- Again, "IPS" is incorrect, and "Detect and Prevent" is not post-infection-focused.
Option Baccurately represents Harmony Endpoint's post-infection capabilities as per the documentation.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 329: "Harmony Endpoint Anti-Ransomware, Behavioral Guard and Forensics" (incident analysis).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 346: "Forensics" (automated attack analysis).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 336: "Quarantine Settings and Attack Remediation" (quarantine and remediation).
NEW QUESTION # 70
Which User Roles are on the Endpoint Security Management Server for On-Premises servers?
- A. Super Admin, Primary Administrator, User Admin, Read-Only
- B. Admin and Read-Only
- C. Primary Administrator and Read-Only
- D. Super Admin, Read-Write All, Read-Only
Answer: A
NEW QUESTION # 71
Media Encryption and Port Protection (MEPP) provide strong encryption for removable media, such as?
- A. USB drives, CD/DVDs, and SD cards, and for external ports
- B. Cables and Ethernet cords
- C. USB drives and CD/DVDs
- D. External ports only
Answer: A
Explanation:
Media Encryption and Port Protection (MEPP) in Check Point Harmony Endpoint is a feature designed to secure data on removable media by providing strong encryption and to control access through external ports.
According to theCP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdfonpage 280, under the section
"Media Encryption & Port Protection," it states:
"Protects data stored on the computers by encrypting removable media devices and allowing tight control over computers' ports (USB, Bluetooth, and so on)." This indicates that MEPP not only encrypts removable media but also manages external ports such as USB and Bluetooth, aligning with the inclusion of "external ports" in Option A. Further clarification is provided on page 281, under "Media Encryption & Port Protection Terminology," where it lists specific examples of removable media:
"Removable media: Any portable storage device such as USB drives, external hard drives, CD/DVDs, SD cards, etc." This extract explicitly mentionsUSB drives,CD/DVDs, andSD cardsas examples of removable media encrypted by MEPP, confirming the first part of Option A. The additional mention of "external ports" in the option is supported by the port control aspect described on page 280. Thus,Option Afully captures the scope of MEPP's functionality.
* Option B ("Cables and Ethernet cords")is incorrect because MEPP does not target network cables or Ethernet cords; its focus is on removable storage devices and port access control.
* Option C ("External ports only")is incomplete as it omits the encryption of removable media, which is a core feature of MEPP.
* Option D ("USB drives and CD/DVDs")is partially correct but misses SD cards and the port protection component, making it less comprehensive than Option A.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 280: "Media Encryption & Port Protection" (describes encryption of removable media and control of ports).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 281: "Media Encryption & Port Protection Terminology" (lists examples of removable media).
NEW QUESTION # 72
How does Full Disk Encryption (FDE) add another layer of security?
- A. By offering port protection
- B. By offering media encryption
- C. By offering pre-boot protection
- D. By offering encryption
Answer: C
Explanation:
Full Disk Encryption (FDE) in Check Point Harmony Endpoint enhances security beyond basic encryption by implementingpre-boot protection, which requires user authentication before the operating system loads. This is detailed in theCP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdfonpage 217, under "Check Point Full Disk Encryption":
"Combines Pre-boot protection, boot authentication, and strong encryption to make sure that only authorized users are given access to information stored on desktops and laptops." This statement highlights that pre-boot protection is a distinct layer of security, ensuring that the system remains inaccessible until authentication is completed. Further elaboration is found onpage 223, under
"Authentication before the Operating System Loads (Pre-boot)":
"Pre-boot protection prevents unauthorized access to the operating system or bypass of boot protection." The pre-boot mechanism adds a critical layer by securing the system at the earliest stage of the boot process, distinguishing it from general encryption (which is a prerequisite but not the "additional layer" the question seeks). Thus,Option Bis the correct answer.
* Option A ("By offering media encryption")is incorrect because media encryption is a feature of MEPP, not FDE (see page 280).
* Option C ("By offering port protection")is also incorrect as port protection pertains to MEPP, not FDE (see page 280).
* Option D ("By offering encryption")is too vague and does not specify the additional layer; encryption is inherent to FDE, but pre-boot protection is the added security mechanism.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 217: "Check Point Full Disk Encryption" (mentions pre-boot protection as a key feature).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 223: "Authentication before the Operating System Loads (Pre-boot)" (explains the role of pre-boot protection).
NEW QUESTION # 73
What is the default encryption algorithm in the Full Disk Encryption tab under Advanced Settings?
- A. XTS-AES 256 bit
- B. AES-CBC 256 bit
- C. XTS-AES 128 bit
- D. AES-CBC 128 bit
Answer: A
NEW QUESTION # 74
External Policy Servers are placed between the Endpoint clients and the Endpoint Security Management Server. What benefit does the External Endpoint Policy Server bring?
- A. Polling beat and delta requests
- B. Cluster and Delta requests
- C. Test packet and delta requests
- D. Heartbeat and synchronization requests
Answer: D
NEW QUESTION # 75
One of the Data Security Software Capability protections included in the Harmony Endpoint solution is
- A. Data Leak Firewall
- B. Remote Access VPN
- C. Memory Encryption
- D. Dynamic Data Protection
Answer: B
NEW QUESTION # 76
When can administrators prepare the client for the FDE software package installation and deployment?
- A. Once the client system volumes have 32 MB of space
- B. Once a client meets the maximum system requirements
- C. Once a client machine meets the minimum system requirements
- D. Once the policy is installed
Answer: C
Explanation:
Preparing a client for Full Disk Encryption (FDE) installation and deployment involves ensuring that the endpoint meets specific prerequisites. TheCP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdfexplicitly outlines these requirements.
Onpage 249, under "Client Requirements for Full Disk Encryption Deployment," the document states:
"Before deploying Full Disk Encryption, ensure that the client machine meets the minimum system requirements." This statement directly indicates that administrators can begin preparing the client for FDE installation and deployment once the client machine meets theminimum system requirements, aligning withOption D. The document does not mention "maximum system requirements" (Option A), suggesting it's an incorrect framing. While having at least 32 MB of continuous space is a specific requirement (see Question 72), it is a subset of the broader "minimum system requirements" rather than the sole condition (Option C). Additionally, policy installation (Option B) occurs after preparation, as detailed onpage 250under "Completing Full Disk Encryption Deployment on a Client," which describes stages like policy application post-preparation.
Thus,Option Dis the most accurate and comprehensive answer based on the official documentation.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 249: "Client Requirements for Full Disk Encryption Deployment" (minimum requirements).
NEW QUESTION # 77
You are facing a lot of CPU usage and high bandwidth consumption on your Endpoint Security Server. You check and verify that everything is working as it should be, but the performance is still very slow. What can you do to decrease your bandwidth and CPU usage?
- A. You can use some of your Endpoints as Super Nodes since super nodes reduces bandwidth as well as CPU usage.
- B. The managements High Availability sizing is not correct. You have to purchase more servers and add them to the cluster.
- C. Your company's size is not large enough to have a valid need for Endpoint Solution.
- D. Your company needs more bandwidth. You have to increase your bandwidth by 300%
Answer: A
NEW QUESTION # 78
On which search engines/web sites is the Safe Search feature supported in Harmony Endpoint?
- A. Google and Bing if the Harmony Endpoint Management is On-Premises deployment
- B. Google, Bing, and Yahoo!
- C. Google. Bing, Yahoo! by default, and extra support for Baidu, Yandex, Lycos and Excite if the Harmony Endpoint Management is deployed in Cloud
- D. Google, Yahoo! and OneSearch
Answer: B
NEW QUESTION # 79
......
CheckPoint Exam 2026 156-536 Dumps Updated Questions: https://protechtraining.actualtestsit.com/CheckPoint/156-536-exam-prep-dumps.html